<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>机械设计家园-Goeway™.me-就走寻常路 &#187; 资源/Documents</title>
	<atom:link href="http://www.goeway.me/category/documents/feed" rel="self" type="application/rss+xml" />
	<link>http://www.goeway.me</link>
	<description>设计.生活.读书</description>
	<lastBuildDate>Sun, 10 Apr 2011 23:51:21 +0000</lastBuildDate>
	<generator>http://wordpress.org/?v=2.8.2</generator>
	<language>en</language>
	<sy:updatePeriod>hourly</sy:updatePeriod>
	<sy:updateFrequency>1</sy:updateFrequency>
			<item>
		<title>Injection Molding Design Guidelines注塑模具设计指导</title>
		<link>http://www.goeway.me/152-injection-molding-design-guidelines.html</link>
		<comments>http://www.goeway.me/152-injection-molding-design-guidelines.html#comments</comments>
		<pubDate>Mon, 05 Jul 2010 11:46:10 +0000</pubDate>
		<dc:creator>admin</dc:creator>
				<category><![CDATA[塑料/Plastic]]></category>
		<category><![CDATA[本站文档/Goeway Docs]]></category>
		<category><![CDATA[资源/Documents]]></category>

		<guid isPermaLink="false">http://www.goeway.me/?p=152</guid>
		<description><![CDATA[File Name
Injection Molding Design Guidelines注塑模具设计指导
Introduction
Much has been written regarding design guidelines for injection molding. Yet, the design guidelines can be summed up in just a few design rules.
已经有许多关于设计注塑模具的书了,但是设计准则可以被概括以下几点:
Use uniform wall thicknesses throughout the part. This will minimize sinking, warping, residual stresses, and improve mold fill and cycle times.
1.零件整体壁厚保持均匀.这样可以最小化缩坑,翘曲,强度减小,模具填充和循环时间.
Use generous radius at all corners. The inside [...]]]></description>
		<wfw:commentRss>http://www.goeway.me/152-injection-molding-design-guidelines.html/feed</wfw:commentRss>
		<slash:comments>1</slash:comments>
		</item>
		<item>
		<title>ASME Y14.5M GD&amp;T 中英文对照讲解(重新上传)</title>
		<link>http://www.goeway.me/148-asme-y14-5m-gdt-chinese-vs-englis.html</link>
		<comments>http://www.goeway.me/148-asme-y14-5m-gdt-chinese-vs-englis.html#comments</comments>
		<pubDate>Sun, 04 Jul 2010 12:48:02 +0000</pubDate>
		<dc:creator>admin</dc:creator>
				<category><![CDATA[书籍/Books]]></category>
		<category><![CDATA[本站文档/Goeway Docs]]></category>
		<category><![CDATA[资源/Documents]]></category>

		<guid isPermaLink="false">http://www.goeway.me/?p=148</guid>
		<description><![CDATA[Introduction 简介:
一份ASME Y14.5 的中英文对照讲解,非常难得的中文资料.
关于ASME:最新的ASME  Y14.5M – 1994维度及公差标准反映出12年来最巨大的一些变革。本课程聚焦于这一新的标准在客户所在组织的具体应用，并且从设计者、生产者和检验者的角度对 GD&#038;T功能性的应用。
应大家的要求重发本站一系列经典文档.]]></description>
		<wfw:commentRss>http://www.goeway.me/148-asme-y14-5m-gdt-chinese-vs-englis.html/feed</wfw:commentRss>
		<slash:comments>1</slash:comments>
		</item>
		<item>
		<title>螺纹培训教材-非常详细</title>
		<link>http://www.goeway.me/144-threads.html</link>
		<comments>http://www.goeway.me/144-threads.html#comments</comments>
		<pubDate>Sun, 04 Jul 2010 12:30:27 +0000</pubDate>
		<dc:creator>admin</dc:creator>
				<category><![CDATA[本站文档/Goeway Docs]]></category>
		<category><![CDATA[资源/Documents]]></category>

		<guid isPermaLink="false">http://www.goeway.me/?p=144</guid>
		<description><![CDATA[第一部分   基 础 知 识

                                第一章   度量
                               
     当今世界上长度计量单位主要有两种，一种为公制，计量单位为米（m）、厘米（cm）、毫米（mm）等，在欧州、我国及日本等东南亚地区使用较多，另一种为英制，计量单位主要为英寸（inch），相当于我国旧制的市寸，在美国、英国等欧美国家使用较多。
   1、公制计量：（10进制）
                 1m =100 cm=1000 mm
                                                                1 cm
									
            0     1   2    3     4    5    6    7     8    9    10 mm
   2、英制计量：（8进制）
           1英寸=8英分        1英寸=25.4 mm      3/8×25.4 =9.52

             1/16    3/16  5/16    7/16   9/16   11/16  13/16  15/16
															
            0    1/8    1/4    3/8    1/2    5/8    3/4    7/8    1 inch
   3、1/4以下的产品用番号来表示其称呼径，如：
          4#，   5#，   6#，   7#，   8#，  10#，  12#

第二章  螺    纹

一、螺纹是一种在固体外表面或内表面的截面上，有均匀螺旋线凸起的形状。根据其结构特点和用途可分为三大类：
   （一）、普通螺纹：牙形为三角形，用于连接或紧固零件。普通螺纹按螺距分为粗牙和细牙螺纹两种，细牙螺纹的连接强度较高。
   （二）、传动螺纹：牙形有梯形、矩形、锯形及三角形等。
（三）、密封螺纹：用于密封连接，主要是管用螺纹、锥螺纹与锥管螺纹。]]></description>
		<wfw:commentRss>http://www.goeway.me/144-threads.html/feed</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>常用塑料手册（20种）</title>
		<link>http://www.goeway.me/142-20_common_used_plastic.html</link>
		<comments>http://www.goeway.me/142-20_common_used_plastic.html#comments</comments>
		<pubDate>Sun, 04 Jul 2010 12:24:39 +0000</pubDate>
		<dc:creator>admin</dc:creator>
				<category><![CDATA[塑料/Plastic]]></category>
		<category><![CDATA[本站文档/Goeway Docs]]></category>
		<category><![CDATA[机械技术/METechnology]]></category>
		<category><![CDATA[资源/Documents]]></category>

		<guid isPermaLink="false">http://www.goeway.me/?p=142</guid>
		<description><![CDATA[
文档内容:
1.ABS 丙烯腈-丁二烯-苯乙烯共聚物
典型应用范围:
汽车（仪表板，工具舱门，车轮盖，反光镜盒等），电冰箱，大强度工具（头发烘干机，搅拌器，食品加工机，割草机等），电话机壳体，打字机键盘，娱乐用车辆如高尔夫球手推车以及喷气式雪撬车等。
注塑模工艺条件:
干燥处理：ABS材料具有吸湿性，要求在加工之前进行干燥处理。建议干燥条件为80～90℃下最少干燥2小时。材料温度应保证小于0.1%。
熔化温度：210～280℃；建议温度：245℃。
模具温度：25～70℃。（模具温度将影响塑件光洁度，温度较低则导致光洁度较低）。
注射压力：500～1000bar。
注射速度：中高速度。
化学和物理特性:
ABS是由丙烯腈、丁二烯和苯乙烯三种化学单体合成。每种单体都具有不同特性：丙烯腈有高强度、热稳定性及化学稳定性；丁二烯具有坚韧性、抗冲击特性；苯乙烯具有易加工、高光洁度及高强度。从形态上看，ABS是非结晶性材料。三中单体的聚合产生了具有两相的三元共聚物，一个是苯乙烯-丙烯腈的连续相，另一个是聚丁二烯橡胶分散相。ABS的特性主要取决于三种单体的比率以及两相中的分子结构。这就可以在产品设计上具有很大的灵活性，并且由此产生了市场上百种不同品质的ABS材料。这些不同品质的材料提供了不同的特性，例如从中等到高等的抗冲击性，从低到高的光洁度和高温扭曲特性等。ABS材料具有超强的易加工性，外观特性，低蠕变性和优异的尺寸稳定性以及很高的抗冲击强度。
2.PA6 聚酰胺6或尼龙6 
典型应用范围:
由于有很好的机械强度和刚度被广泛用于结构部件。由于有很好的耐磨损特性，还用于制造轴承。
注塑模工艺条件:
干燥处理：由于PA6很容易吸收水分，因此加工前的干燥特别要注意。如果材料是用防水材料包装供应的，则容器应保持密闭。如果湿度大于0.2%，建议在80℃以上的热空气中干燥16小时。如果材料已经在空气中暴露超过8小时，建议进行105℃，8小时以上的真空烘干。
熔化温度：230~280℃，对于增强品种为250~280℃。
模具温度：80~90℃。模具温度很显著地影响结晶度，而结晶度又影响着塑件的机械特性。对于结构部件来说结晶度很重要，因此建议模具温度为80~90℃。对于薄壁的，流程较长的塑件也建议施用较高的模具温度。增大模具温度可以提高塑件的强度和刚度，但却降低了韧性。如果壁厚大于3mm，建议使用20~40℃的低温模具。对于玻璃增强材料模具温度应大于80℃。
注射压力：一般在750~1250bar之间（取决于材料和产品设计）。
注射速度：高速（对增强型材料要稍微降低）。
流道和浇口:由于PA6的凝固时间很短，因此浇口的位置非常重要。浇口孔径不要小于0.5*t（这里t为塑件厚度）。如果使用热流道，浇口尺寸应比使用常规流道小一些，因为热流道能够帮助阻止材料过早凝固。如果用潜入式浇口，浇口的最小直径应当是0.75mm。
化学和物理特性:
PA6的化学物理特性和PA66很相似，然而，它的熔点较低，而且工艺温度范围很宽。它的抗冲击性和抗溶解性比PA66要好,但吸湿性也更强。因为塑件的许多品质特性都要受到吸湿性的影响，因此使用PA6设计产品时要充分考虑到这一点。为了提高PA6的机械特性，经常加入各种各样的改性剂。玻璃就是最常见的添加剂，有时为了提高抗冲击性还加入合成橡胶，如EPDM和SBR等。对于没有添加剂的产品，PA6的收缩率在1%到1.5%之间。加入玻璃纤维添加剂可以使收缩率降低到0.3%（但和流程相垂直的方向还要稍高一些）。成型组装的收缩率主要受材料结晶度和吸湿性影响。实际的收缩率还和塑件设计、壁厚及其它工艺参数成函数关系。
&#8230;&#8230;..
]]></description>
		<wfw:commentRss>http://www.goeway.me/142-20_common_used_plastic.html/feed</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>图纸缩略语词汇[下载]/drawing abbreviations</title>
		<link>http://www.goeway.me/138-drawing_abbreviations.html</link>
		<comments>http://www.goeway.me/138-drawing_abbreviations.html#comments</comments>
		<pubDate>Sun, 04 Jul 2010 12:18:57 +0000</pubDate>
		<dc:creator>admin</dc:creator>
				<category><![CDATA[本站文档/Goeway Docs]]></category>
		<category><![CDATA[英语/English]]></category>
		<category><![CDATA[资源/Documents]]></category>

		<guid isPermaLink="false">http://www.goeway.me/?p=138</guid>
		<description><![CDATA[开始陆续上传以前的经典文档,请关注:
图纸缩略语词汇
Historically, abbreviations were used frequently in construction documents as part of standard practice. They were part of the drawing symbology, but led to errors of interpretation by contractors. Since today, CADD drawing text is fast to input and is legible, abbreviations are strictly prohibited unless they are absolutely necessary due to space limitations, or they [...]]]></description>
		<wfw:commentRss>http://www.goeway.me/138-drawing_abbreviations.html/feed</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>To Bee or Not to Bee 蜜蜂的哲学 原版下载</title>
		<link>http://www.goeway.me/135-to-bee-or-not-to-bee-%e8%9c%9c%e8%9c%82%e7%9a%84%e5%93%b2%e5%ad%a6-%e5%8e%9f%e7%89%88%e4%b8%8b%e8%bd%bd.html</link>
		<comments>http://www.goeway.me/135-to-bee-or-not-to-bee-%e8%9c%9c%e8%9c%82%e7%9a%84%e5%93%b2%e5%ad%a6-%e5%8e%9f%e7%89%88%e4%b8%8b%e8%bd%bd.html#comments</comments>
		<pubDate>Sun, 20 Jun 2010 15:25:22 +0000</pubDate>
		<dc:creator>Larry Xia</dc:creator>
				<category><![CDATA[书籍/Books]]></category>
		<category><![CDATA[本站文档/Goeway Docs]]></category>
		<category><![CDATA[英语/English]]></category>
		<category><![CDATA[资源/Documents]]></category>

		<guid isPermaLink="false">http://www.goeway.me/?p=135</guid>
		<description><![CDATA[To Bee or Not to Bee ? 一听这个名字就能被它吸引的一本好书. 目前国内有了中文版, 书名叫&#60;&#60;蜜蜂的哲学&#62;&#62;, 个人觉得比台湾的译法&#60;&#60;人生最重要的问题&#62;&#62;文艺很多.
来自eBookDB的原版介绍:

Authors:John Penberthy,  Laurie Barrow
Publisher:  Panorama Pre
Keywords: bee,  honey, revised, making, there’s, book, beeings, life
Number of Pages: 112
Published:  2005-07-15
ISBN-10: 0976864207
ISBN-13: 9780976864202
Book Description:
Now in seven languages worldwide, To Bee or Not to Bee is the  story &#8212; clever and spiritually sophisticated &#8212; [...]]]></description>
		<wfw:commentRss>http://www.goeway.me/135-to-bee-or-not-to-bee-%e8%9c%9c%e8%9c%82%e7%9a%84%e5%93%b2%e5%ad%a6-%e5%8e%9f%e7%89%88%e4%b8%8b%e8%bd%bd.html/feed</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>后BT时代美国大片非主流下载法</title>
		<link>http://www.goeway.me/112-nonbt_go_rapidshare.html</link>
		<comments>http://www.goeway.me/112-nonbt_go_rapidshare.html#comments</comments>
		<pubDate>Sun, 20 Dec 2009 10:44:49 +0000</pubDate>
		<dc:creator>Larry Xia</dc:creator>
				<category><![CDATA[网站推荐/Good Webs]]></category>
		<category><![CDATA[rapidshare]]></category>

		<guid isPermaLink="false">http://www.goeway.cn/?p=112</guid>
		<description><![CDATA[由于伟大的广*总局的努力,伴随BTchina等的倒下,中华人民共和国正式进入后BT时代.这里,我们来介绍一种下载美国大片的非主流方法.之所以说是非主流,因为这种方式仅适合部分人群&#8211;英语较好,不急迫之人.
我们先来介绍Rapidshare,Rapidshare网站是世界知名的文件上传下载托管服务商,在ALEXA网站的综合排名为第11位, 上面保存了10PB的各种资源,当然各种美国大片必不可少了. 由于Rapidshare的隐私性, 用户是没办法查询文件的,这时我们就需要专门的Rapidshare搜索工具了. 搜索视频文件, RSbay.com最适合不过了.
Rsbay 拥有11,270,124个链接,其资源丰富啊,用XVid作为关键字搜索数量就超过22万个条目(每个条目下又用多个链接,总数很庞大了), 我们用2012为例来下载.
搜索&#8221;2012 doomsday&#8221; 提示有425个结果,随便点击一个进去, 比如&#8221;2012.doomsday.2008.dvdrip.xvid.tfe.part5.rar&#8221;, 然后会看到五个相关的Rapidshare文件, 点击&#8221;Request Link&#8220;, 就会跳出Rapidshare的链接.
有了Rapidshare的链接我们如何下载呢? 由于Rapidshare的限制, 免费用户下载很大的文件会让你等上很长一段时间, 不是一般有耐心能搞定的. 网上有很多下载工具,也可以试试.  这里我们推荐一个网站, 可以免费帮你下载Rapidshare文件,而且不需等待, 它就是rsleech, 在Rsleech的网站上输入刚才获得的地址,点击&#8221;Download&#8221; 马上就能下载了. 不过他也有流量和数量的限制, 如果你是有钱大人,  最好在淘宝上买个rs账号吧.^-^
Rapidshare上的资源多少英语的, 所以一般是没有字幕或者英文字幕的&#8230;
最后, 其他几个RAPID搜索网站:
Filstube.com  非常不错  不过被河蟹了
Rapidshare8.com 多次推荐
KVAZ.com  数量众多
rsfind.com 可以试试
]]></description>
		<wfw:commentRss>http://www.goeway.me/112-nonbt_go_rapidshare.html/feed</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>NEMA与IP防护等级的对照比较</title>
		<link>http://www.goeway.me/105-nema_ip.html</link>
		<comments>http://www.goeway.me/105-nema_ip.html#comments</comments>
		<pubDate>Wed, 23 Sep 2009 12:02:51 +0000</pubDate>
		<dc:creator>admin</dc:creator>
				<category><![CDATA[其它/Others]]></category>
		<category><![CDATA[本站文档/Goeway Docs]]></category>

		<guid isPermaLink="false">http://www.goeway.cn/?p=105</guid>
		<description><![CDATA[NEMA/IP Enclosure Types:
The National Electrical Manufacturers Association (NEMA) provides descriptions,classifications, and test criteria relating to enclosures for electrical equipment. Tables 12-13, 12-14, and 12-15 compare the specific applications of enclosures for indoor and outdoor nonhazardous locations and indoor hazardous locations.
NEMA防护等级，是美国电气制造商协会工业控制装置和系统中的外壳防护标准。NEMA的防护标准除了防尘、防水之外，还包括防爆（IP代码只包括防尘和防水）。
Specific Applications of Enclosures for Indoor Nonhazardous Locations
NEMA的防护场合



Provides a Degree of Protection Against the Following Environmental [...]]]></description>
		<wfw:commentRss>http://www.goeway.me/105-nema_ip.html/feed</wfw:commentRss>
		<slash:comments>1</slash:comments>
		</item>
		<item>
		<title>Tim Brown: Design Thinking</title>
		<link>http://www.goeway.me/92-tim-brown-design-thinking.html</link>
		<comments>http://www.goeway.me/92-tim-brown-design-thinking.html#comments</comments>
		<pubDate>Fri, 14 Aug 2009 23:26:07 +0000</pubDate>
		<dc:creator>Larry Xia</dc:creator>
				<category><![CDATA[其它/Others]]></category>
		<category><![CDATA[本站文档/Goeway Docs]]></category>
		<category><![CDATA[资源/Documents]]></category>
		<category><![CDATA[Design Thinking]]></category>

		<guid isPermaLink="false">http://www.goeway.cn/?p=92</guid>
		<description><![CDATA[im Brown&#8217;s Article about Design Thinking.
Thinking like a designer can transform the way you develop products, services, processes—and even strategy.
Thomas Edison created the electric lightbulb and then wrapped an entire industry around it. The lightbulb is most often thought of as his signature invention, but Edison understood that the bulb was little more than a [...]]]></description>
		<wfw:commentRss>http://www.goeway.me/92-tim-brown-design-thinking.html/feed</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
	</channel>
</rss>

